Gate Company in Glendale - On-Site in 60 Minutes, Fixed the Same Day

Same-day gate service with the price agreed before we start. Licensed and insured technicians covering repairs, operators and access control across the whole service area.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (855) 632-1674

We answer 24/7

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Gate Company in Glendale, AZ

A gate in Glendale has usually been standing in the sun for a long time. Most of what we install here is replacement work on mid-century ranch and tract homes, where an original wrought-iron pedestrian gate or a chain-link driveway gate has finally given out. We install new gates and we repair the ones worth saving, and we also handle the electric side: motors, control boards, safety edges and keypads. If you want to talk through what your property needs, call us at (855) 632-1674. We answer 24/7. Fast dispatch from 7am to 7pm. Estimates are free and the price is agreed before any work starts.

Call (855) 632-1674

Why Glendale Homes Are Different

Glendale’s housing stock runs old. The city has a large concentration of 1950s through 1970s single-story ranch and tract homes, and many still carry their original wrought-iron pedestrian gates, chain-link driveway gates, or gates hung off block-wall entries. That changes the work. A gate built in 1962 has had six decades of desert sun on it, and the metal behaves differently than anything coming out of a north Glendale subdivision today.

The climate is the other half of it. Summer heat pushes past 110°F and the UV load is relentless, which bakes metal, warps wood, and dries out hinges and latches until they bind. Then the monsoon season arrives with microbursts and dust storms that bend lighter gates and work posts loose. Soil matters too: lots in irrigated historic pockets like Catlin Court hold moisture and shift differently than the sandy, caliche-heavy ground elsewhere in the city. A post that needs re-setting on one block may need a completely different footing depth two streets over. We account for all of that before we quote.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Main Glendale Services

Two jobs bring Glendale homeowners to us most often: fixing the gate they already have, and getting the electric operator behind it working again.

Gate Repair in Glendale

Most repairs here start with a gate that has sagged, seized, or stopped latching. On older Glendale properties the culprit is usually years of heat cycling through welds and hinges rather than a part that failed overnight. We look at the gate as a system: the frame, the hinges, the posts, the latch, and how the whole thing is anchored. Repair first is how we work. If the gate can be brought back into service, that’s what we recommend, and we’ll tell you plainly when it can’t. For the full rundown of what we fix and how we approach it, see Gate Repair in Glendale.

Gate Repair in Glendale

Electric Gate Repair in Glendale

An automatic gate that won’t open is usually a motor, a control board, or a safety device doing its job when it shouldn’t. We diagnose low-voltage wiring, limit settings, photo eyes, and operator logic on the systems Glendale homes actually have, including older units where the board is long discontinued but the mechanism is still sound. Dust and heat are hard on outdoor control enclosures, and a surprising number of calls come down to a connection that has worked loose over a summer. We work from the motor to the control board. Details are on Electric Gate Repair in Glendale.

Electric Gate Repair in Glendale
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 632-1674

Gate Installation in Glendale

Installing a gate in Glendale means matching new hardware to a property that was probably built before anyone thought about automatic operators. On a 1950s ranch home the existing posts and pilasters set the terms of the job; on a newer north Glendale lot you have more freedom but the sun and soil still shape what we specify. We handle Gate Installation as a full-service job from measurement through final adjustment, so the gate you get is sized to the opening, the operator, and the way the ground actually sits. Our technicians have up to 12 years of experience, and they arrive already familiar with the brand in front of them rather than learning it on your driveway. That matters in a city where the same gate may be a 1950s iron original one block and a builder-grade aluminum panel the next.

Automatic Gate Installation

Signs you need it

You’re tired of getting out of the car every time, or your existing manual gate is too heavy or too far from the house to open comfortably by hand.

What it costs in Glendale

Automatic gate installation in Glendale typically runs $2,500 to $6,500 for a residential swing gate with operator, and the written estimate sets the final price.

How we do it

We measure the opening and gate weight, confirm the power source and footing, set or adapt the posts, hang the gate, mount and program the operator, install the safety edges and photo eyes, then test every cycle before we leave.

Driveway Gate Installation

Signs you need it

Your driveway has no gate at all, or the chain-link or tube gate that’s there has bent past the point where straightening it will hold.

What it costs in Glendale

A new driveway gate in Glendale usually lands between $1,800 and $5,000 depending on width, material, and whether it swings or slides, with the written estimate setting the final price.

How we do it

We lay out the opening against the driveway edges, set posts to proper footing depth in whatever the soil gives us, hang and level the gate, and fit the latch, stops, and any operator in one sequence.

What Gate Installation Costs in Glendale

These are typical ranges for Glendale residential work. Every job gets a written estimate before anything is ordered or installed.

Item Typical range in Glendale
Manual driveway gate, installed $1,800 – $5,000
Automatic swing gate with operator $2,500 – $6,500
Sliding gate with operator $3,000 – $8,000

Do I need a permit to install a gate in Glendale?

Often yes, especially for a gate tied into a block wall or pilaster at the property line. Ask the city’s building department before you order anything, and check your HOA rules too, since many Glendale subdivisions restrict height and material.

Can you match the original ironwork on an older Glendale gate?

In many cases we can. Catlin Court and downtown Glendale have plenty of 1940s and 1950s wrought-iron gates welded to decorative block pilasters, and the recurring challenge is replacing the gate without disturbing the historic masonry. We assess that on site before quoting.

Questions about your gate repair?Free estimate, price agreed before work starts
Call (855) 632-1674

Brands We Service in Glendale

We work on your brand. That includes LiftMaster, FAAC, Elite, Mighty Mule, Linear, Viking, Ghost Controls, BFT, and DoorKing, and we diagnose across all of them rather than steering you toward whichever one we’d rather sell. We don’t stock parts, so turnaround depends on what the gate needs and how quickly the part can be sourced. You can see the full lineup on our brands page.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Gate Company in Glendale, AZ

Typical ranges for the work we do most in Glendale:

Service Typical range in Glendale
Gate hinge and latch repair $150 – $400
Gate post re-setting or replacement $300 – $900
Wrought-iron gate weld repair $200 – $600
Gate sag correction and realignment $180 – $500
Electric gate diagnostic and board repair $250 – $800
Gate operator motor replacement $600 – $1,800
Safety edge and photo eye replacement $200 – $550
Keypad or remote access repair $150 – $450
Manual driveway gate, installed $1,800 – $5,000
Automatic swing gate with operator $2,500 – $6,500
Sliding gate with operator $3,000 – $8,000

What pushes a Glendale job toward the top of a range is usually what we find underground: a post footing that has to be dug out of caliche, or a property-line pilaster that can’t be touched without masonry work. Material choice and operator brand move the number too. Whatever the range says, the written estimate is the price, quoted and agreed before any work starts.

Want to talk it through?Free estimate, price agreed before work starts
Call (855) 632-1674

Neighborhoods We Serve in Glendale

We cover the whole city, from the historic blocks near downtown out to the newer subdivisions on the north side. Response across Glendale is fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday.

  • Catlin Court
  • Downtown Glendale
  • Arrowhead Ranch
  • Sahuaro Ranch
  • Thunderbird Acres

Service Area – Cities Near Glendale

Glendale sits in the middle of the west valley, and we take gate work in the cities around it. If you’re just outside the Glendale line, we can usually still help. We cover Sun City, AZ, El Mirage, AZ, Phoenix, AZ, and Avondale, AZ, along with the rest of the surrounding area. Call (855) 632-1674 and we’ll confirm coverage and get you a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Serving Glendale, AZ – Our Local Coverage Area

We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Gate Company in Glendale

Ready to get started? Free estimates · 1-hour response in Glendale
Call (855) 632-1674

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Glendale Customers Say

★★★★★ 4.8 from 8+ reviews

"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."

- Paige Vaughn

"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."

- Alicia Ellison

"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."

- Lamont Bryant

How It Works in Glendale

Getting your gate repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Glendale - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Glendale. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7