Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Glendale, AZ
A gate in Glendale has usually been standing in the sun for a long time. Most of what we install here is replacement work on mid-century ranch and tract homes, where an original wrought-iron pedestrian gate or a chain-link driveway gate has finally given out. We install new gates and we repair the ones worth saving, and we also handle the electric side: motors, control boards, safety edges and keypads. If you want to talk through what your property needs, call us at (855) 632-1674. We answer 24/7. Fast dispatch from 7am to 7pm. Estimates are free and the price is agreed before any work starts.
Why Glendale Homes Are Different
Glendale’s housing stock runs old. The city has a large concentration of 1950s through 1970s single-story ranch and tract homes, and many still carry their original wrought-iron pedestrian gates, chain-link driveway gates, or gates hung off block-wall entries. That changes the work. A gate built in 1962 has had six decades of desert sun on it, and the metal behaves differently than anything coming out of a north Glendale subdivision today.
The climate is the other half of it. Summer heat pushes past 110°F and the UV load is relentless, which bakes metal, warps wood, and dries out hinges and latches until they bind. Then the monsoon season arrives with microbursts and dust storms that bend lighter gates and work posts loose. Soil matters too: lots in irrigated historic pockets like Catlin Court hold moisture and shift differently than the sandy, caliche-heavy ground elsewhere in the city. A post that needs re-setting on one block may need a completely different footing depth two streets over. We account for all of that before we quote.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Glendale Services
Two jobs bring Glendale homeowners to us most often: fixing the gate they already have, and getting the electric operator behind it working again.
Gate Repair in Glendale
Most repairs here start with a gate that has sagged, seized, or stopped latching. On older Glendale properties the culprit is usually years of heat cycling through welds and hinges rather than a part that failed overnight. We look at the gate as a system: the frame, the hinges, the posts, the latch, and how the whole thing is anchored. Repair first is how we work. If the gate can be brought back into service, that’s what we recommend, and we’ll tell you plainly when it can’t. For the full rundown of what we fix and how we approach it, see Gate Repair in Glendale.

Electric Gate Repair in Glendale
An automatic gate that won’t open is usually a motor, a control board, or a safety device doing its job when it shouldn’t. We diagnose low-voltage wiring, limit settings, photo eyes, and operator logic on the systems Glendale homes actually have, including older units where the board is long discontinued but the mechanism is still sound. Dust and heat are hard on outdoor control enclosures, and a surprising number of calls come down to a connection that has worked loose over a summer. We work from the motor to the control board. Details are on Electric Gate Repair in Glendale.

Gate Installation in Glendale
Installing a gate in Glendale means matching new hardware to a property that was probably built before anyone thought about automatic operators. On a 1950s ranch home the existing posts and pilasters set the terms of the job; on a newer north Glendale lot you have more freedom but the sun and soil still shape what we specify. We handle Gate Installation as a full-service job from measurement through final adjustment, so the gate you get is sized to the opening, the operator, and the way the ground actually sits. Our technicians have up to 12 years of experience, and they arrive already familiar with the brand in front of them rather than learning it on your driveway. That matters in a city where the same gate may be a 1950s iron original one block and a builder-grade aluminum panel the next.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car every time, or your existing manual gate is too heavy or too far from the house to open comfortably by hand.
What it costs in Glendale
Automatic gate installation in Glendale typically runs $2,500 to $6,500 for a residential swing gate with operator, and the written estimate sets the final price.
How we do it
We measure the opening and gate weight, confirm the power source and footing, set or adapt the posts, hang the gate, mount and program the operator, install the safety edges and photo eyes, then test every cycle before we leave.
Driveway Gate Installation
Signs you need it
Your driveway has no gate at all, or the chain-link or tube gate that’s there has bent past the point where straightening it will hold.
What it costs in Glendale
A new driveway gate in Glendale usually lands between $1,800 and $5,000 depending on width, material, and whether it swings or slides, with the written estimate setting the final price.
How we do it
We lay out the opening against the driveway edges, set posts to proper footing depth in whatever the soil gives us, hang and level the gate, and fit the latch, stops, and any operator in one sequence.
What Gate Installation Costs in Glendale
These are typical ranges for Glendale residential work. Every job gets a written estimate before anything is ordered or installed.
| Item | Typical range in Glendale |
|---|---|
| Manual driveway gate, installed | $1,800 – $5,000 |
| Automatic swing gate with operator | $2,500 – $6,500 |
| Sliding gate with operator | $3,000 – $8,000 |
Do I need a permit to install a gate in Glendale?
Often yes, especially for a gate tied into a block wall or pilaster at the property line. Ask the city’s building department before you order anything, and check your HOA rules too, since many Glendale subdivisions restrict height and material.
Can you match the original ironwork on an older Glendale gate?
In many cases we can. Catlin Court and downtown Glendale have plenty of 1940s and 1950s wrought-iron gates welded to decorative block pilasters, and the recurring challenge is replacing the gate without disturbing the historic masonry. We assess that on site before quoting.
Brands We Service in Glendale
We work on your brand. That includes LiftMaster, FAAC, Elite, Mighty Mule, Linear, Viking, Ghost Controls, BFT, and DoorKing, and we diagnose across all of them rather than steering you toward whichever one we’d rather sell. We don’t stock parts, so turnaround depends on what the gate needs and how quickly the part can be sourced. You can see the full lineup on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Glendale, AZ
Typical ranges for the work we do most in Glendale:
| Service | Typical range in Glendale |
|---|---|
| Gate hinge and latch repair | $150 – $400 |
| Gate post re-setting or replacement | $300 – $900 |
| Wrought-iron gate weld repair | $200 – $600 |
| Gate sag correction and realignment | $180 – $500 |
| Electric gate diagnostic and board repair | $250 – $800 |
| Gate operator motor replacement | $600 – $1,800 |
| Safety edge and photo eye replacement | $200 – $550 |
| Keypad or remote access repair | $150 – $450 |
| Manual driveway gate, installed | $1,800 – $5,000 |
| Automatic swing gate with operator | $2,500 – $6,500 |
| Sliding gate with operator | $3,000 – $8,000 |
What pushes a Glendale job toward the top of a range is usually what we find underground: a post footing that has to be dug out of caliche, or a property-line pilaster that can’t be touched without masonry work. Material choice and operator brand move the number too. Whatever the range says, the written estimate is the price, quoted and agreed before any work starts.
Neighborhoods We Serve in Glendale
We cover the whole city, from the historic blocks near downtown out to the newer subdivisions on the north side. Response across Glendale is fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday.
- Catlin Court
- Downtown Glendale
- Arrowhead Ranch
- Sahuaro Ranch
- Thunderbird Acres
Service Area – Cities Near Glendale
Glendale sits in the middle of the west valley, and we take gate work in the cities around it. If you’re just outside the Glendale line, we can usually still help. We cover Sun City, AZ, El Mirage, AZ, Phoenix, AZ, and Avondale, AZ, along with the rest of the surrounding area. Call (855) 632-1674 and we’ll confirm coverage and get you a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Glendale, AZ – Our Local Coverage Area
We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Glendale
Fast dispatch runs 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside those hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We answer the phone 24/7 regardless.
Both can. Many Glendale subdivisions set their own rules on height, color, and material, and the city’s building department handles permits, particularly where a gate attaches to a block wall at the property line. Check both before ordering.
Yes. We work across the west valley, including Sun City, El Mirage, Phoenix, and Avondale. If you’re unsure whether your address falls inside the area we cover, call and we’ll tell you straight.
Call (855) 632-1674 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Whether you need a gate repaired, an electric operator diagnosed, or a new gate installed, the price is quoted and agreed before any work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Glendale Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Paige Vaughn"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Alicia Ellison"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Lamont Bryant