Gate Installation Cost in Glendale - Typical Prices, Then a Free On-Site Estimate

Typical price ranges for the work, then a free on-site estimate and a written quote for your driveway. Site prep, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (855) 632-1674

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your gate repair?Free estimate, price agreed before work starts
Call (855) 632-1674

How Much Does Gate Installation Cost in Glendale?

Gate installation in Glendale typically runs $2,200 to $6,800 for a residential driveway gate with an operator, and $1,400 to $3,500 for a pedestrian or garden gate. Complex commercial swing and slide systems with access control land between $7,500 and $18,000. Those ranges cover the gate, the hardware, the operator, and the concrete footing, all priced per job from a written estimate.

We’re a dedicated gate specialist, which means we do gates and nothing else. No garage doors, no fencing, no general handyman work. If you’re pricing a new gate or replacing one that’s reached the end of its useful life, we’ll walk the property, look at the opening, and give you a written number you can hold us to. Our technicians have up to 12 years of experience on both mechanical and automated systems.

Glendale sits in the Sonoran Desert, and that shapes gate installation in ways that surprise people moving here from wetter climates. The ground is caliche and decomposed granite in a lot of neighborhoods, which means footing depth sometimes runs deeper than the gate’s size alone would suggest. UV exposure is relentless, so material choice matters more than it does elsewhere. We’ll get into all of that below.

Key Takeaways

  • Residential driveway gate with operator: typically $2,200 to $6,800 in the Glendale market.
  • Pedestrian and garden gates: typically $1,400 to $3,500.
  • Commercial access-control systems: typically $7,500 to $18,000.
  • Caliche soil and hard-rock footing can add $300 to $900 to the concrete and post work.
  • Automated gates are electrical equipment. We strongly recommend a trained technician for operator wiring and power hookup.
  • Estimates are free. Call (855) 632-1674. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Gate Installation Cost Breakdown (2026)

Here’s how the line items break down for a typical residential driveway gate in Glendale. These are estimated ranges for the market, not a quote for your property. The written estimate sets the final price.

Line item Typical range
Gate panel and frame (steel, aluminum, or wrought iron, 12-16 ft driveway) $900 – $2,600
Posts, hinges, latches, and mounting hardware $200 – $550
Concrete footings and post setting $300 – $900
Manual opener hardware (crank, lever, or handle) $60 – $180
Operator and motor (swing or slide) $650 – $1,600
Safety sensors, photo eyes, and safety edge $150 – $450
Keypad, remote receivers, and entry controls $180 – $600
Low-voltage wiring and power run $300 – $1,100
Labor for gate and operator installation $600 – $1,500

A pedestrian gate runs lower across the board because there’s no operator and no motor, and the footing is smaller. Wrought iron costs more on the panel line than aluminum or chain link, and a wide double-swing driveway gate costs more than a single. Adding telephone entry or a video intercom to a commercial system pushes the total up, sometimes by a lot. Brand choice on the operator also moves the number: a Mighty Mule DIY-grade operator and a DoorKing access-control operator are not in the same price universe, and neither is their installation.

One thing we want to be clear about: quoted ranges are estimates. Caliche, hard rock, and a sloped driveway can each add to the footing and labor lines once we’re on site. That’s why we do a physical look before we commit to a number. You can read more about our full range of work on our gate repair page.

Want to talk it through?Free estimate, price agreed before work starts
Call (855) 632-1674

What Affects Gate Installation Pricing in Glendale

Five things move the number more than anything else in this market.

  • Soil conditions. A lot of Glendale lots sit on caliche or decomposed granite, both of which resist a standard post hole. When the ground fights the auger, footing work takes longer and the concrete line goes up. This is a Glendale-specific cost that doesn’t show up in national averages.
  • Gate material and size. Steel, aluminum, wrought iron, and ornamental designs all price differently, and a 16-foot double-swing driveway opening uses more material than a 10-foot single. Heavier panels also need heavier hardware and, on swing gates, stronger operators.
  • Operator type and brand. Swing versus slide, AC versus solar, and the brand all affect both the part cost and the install time. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so we can match the operator to the gate rather than the other way around.
  • Power and wiring distance. If the gate is far from the house, the low-voltage run gets longer and the conduit work gets more involved. Solar operators can sidestep that entirely, at a higher equipment cost.
  • Site access and grading. A gate that meets a sloped driveway or a curved wall requires more fitting and adjustment than one on a flat, straight run. Removal of an old gate and its footings adds time too.
  • Access control features. Keypads, telephone entry, intercoms, and vehicle loop detectors are all common on commercial installs and each adds cost. Homeowners often add a keypad and remote; property managers usually want more.

Sun exposure is the other factor. A gate that faces west takes the full afternoon sun across a Phoenix summer, and that wears on paint, powder coat, and operator housings. Choosing UV-stable finishes and an operator rated for heat isn’t optional here if you want the gate to last. We’ll talk through material and finish options during the estimate.

How to Save on Gate Installation

Practical ways to keep the number down without cutting into the parts that matter.

  • Install a manual gate and automate later, if timing allows. Splitting the work spreads the cost and lets you choose the operator without pressure.
  • Choose a standard operator over a specialty one where the gate allows it. Brand-agnostic service means we’re not tied to one manufacturer, so we can pick what fits the gate rather than what fits a dealer program.
  • Use a solar operator if the gate is far from power. No trench, no conduit run. Higher equipment cost, lower labor, and sometimes a net savings.
  • Keep the opening where it is. Moving a gate opening means new footings and new concrete. If the existing opening works, keep it.
  • Get the written estimate before work starts. Ours is free, and it locks the number. No surprises on the footing line once the digging starts.

One thing we don’t suggest: buying a DIY-grade operator and having a technician install it to save on parts. The controls and safety sensors are the parts that keep a heavy gate from hurting someone, and a mismatch between operator and gate weight is how gates fail. We’re happy to review the specs with you before you buy.

We also want to say this plainly: automated gates involve low-voltage wiring, powered operators, and heavy moving panels. If you’re considering wiring an operator yourself, don’t. That’s work for a trained professional. We handle the electrical side as part of the install, including safety sensors and photo eyes, and we’ll make sure the gate stops and reverses the way it’s supposed to.

For a broader picture of what we do across the area, our Glendale page covers repair, electric gate diagnostics, and installation together. Our technicians have up to 12 years of experience with mechanical and automated systems. Estimates are free. Call (855) 632-1674. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Need a price for your gate repair?Free estimate, price agreed before work starts
Call (855) 632-1674

FAQs – Gate Installation Cost

How much does a driveway gate cost installed in Glendale?

Typically $2,200 to $6,800 for a residential driveway gate with an operator, installed. A pedestrian gate runs $1,400 to $3,500, and a commercial access-control system runs $7,500 to $18,000. Call (855) 632-1674 for an exact quote – estimates are free.

Is it cheaper to repair an existing gate or replace it?

Repair is nearly always cheaper if the gate and operator are structurally sound – a repair visit is typically a fraction of the $2,200 to $6,800 install range. Replacement usually makes more sense when the frame is rusted through or the operator is beyond parts support. We look at what’s there before recommending either. Call (855) 632-1674 and we’ll help you decide.

Can you install the gate and set up the operator the same day?

Many residential installs finish in one day, provided the footings cure and the power run is straightforward. Caliche soil or a long wiring run can push the job to two. Solar operators often save a day on the wiring side. Same-day service is available for repairs and smaller installs. Call (855) 632-1674.

Do I need a permit for a gate in Glendale?

Most cities require a permit for a new driveway gate or a change to a property line, and some HOAs have their own approval process. We can’t quote a permit number, and it varies by property, so check with the city’s building department and your HOA before work starts. Call (855) 632-1674 with questions about the installation itself.

What brands do you install?

We work on nine major gate and operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we’re brand-agnostic, the recommendation follows the gate, not a dealer program. Call (855) 632-1674 for a free estimate.

How long does a gate installation take?

A residential swing gate with an operator typically takes one working day, with the footings curing in between. A commercial slide gate with access control can take two to three. We’ll give you a timeline in the written estimate. Call (855) 632-1674 to schedule.

There’s one more thing worth saying about Glendale specifically. A lot of homes here have block walls and driveway openings that predate the current owner, and sometimes a gate was never installed at all. That’s a clean install, and it’s often quicker than replacing an existing gate because there’s no removal and no surprises under the old footings. If your opening is framed and ready, we can usually size the gate and operator to it without much fuss.

For commercial property managers, the calculus is a little different. A slide gate at a parking entrance needs to keep traffic moving, and the operator and access control have to work together reliably. DoorKing and LiftMaster swing and slide operators are the most common in this setting, and we’re familiar with both. We also handle Ghost Controls and Viking systems that a lot of general repair companies won’t touch. If another company has turned you down because of the brand, call us. We’ll take a look.

We keep the whole lifecycle under one roof: installation, automatic and electric repair, and ongoing repair as the gate ages. That means you don’t need a separate vendor when the operator starts acting up three years down the road. It’s the same technicians, the same familiarity with the system, and the same single point of contact. If a gate fails on a Saturday, we’re closed that day, but call and we’ll book you for the next opening, Sunday through Friday, 7am to 7pm.

Ready to Price Your Gate?

We give free written estimates on gate installation and repair across Glendale. Whether it’s a new driveway gate, an operator replacement, or a full commercial access-control install, we’ll come out, look at the site, and give you a number in writing. Call (855) 632-1674. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Pricing reflects the Glendale market as of 2026. Gate Repair Glendale offers free estimates – call (855) 632-1674.

Written by the team at Gate Repair Glendale.

What Our Customers Say

★★★★★ 4.8 from 8+ reviews

"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."

- Paige Vaughn

"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."

- Alicia Ellison

"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."

- Lamont Bryant
Need Gate Repair help in Glendale? Licensed & insured · 1-hour response · free estimates
Call (855) 632-1674

Request a Free Estimate

Tell us what's going on in Glendale. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7