Gate Parts & Welding Cost in Glendale - Typical Prices, Then a Free On-Site Estimate

Typical price ranges for the work, then a free on-site estimate and a written quote for your driveway. Site prep, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (855) 632-1674

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your gate repair?Free estimate, price agreed before work starts
Call (855) 632-1674

How Much Does Gate Parts & Welding Cost in Glendale?

Gate parts and welding in Glendale typically run from about $85 to $150 for a single small part like a roller, hinge or latch, while welding jobs such as re-hanging a sagging gate or repairing a cracked frame usually cost $150 to $400 depending on the metal and the access. Full operator or control board work, which is where most electric gates end up, tends to land between $200 and $650 for the part plus the labor to fit and program it. Every job is priced by a written estimate after we look at the gate, and the estimate is free.

We’re a dedicated gate specialist, not a general handyman or a fence company that does gates on the side. That focus matters when a gate has a motor, a control board and a brand-specific part, because getting it back in operation means knowing the system in front of us. Gate Repair Glendale works on your brand across nine major operator lines, and we treat parts and welding as repair-first work: fix what’s there before anyone talks about replacement.

Key Takeaways

  • Small parts usually cost $85 to $150 fitted.
  • Welding and structural repairs run $150 to $400 for most residential gates.
  • Operator parts, motors and control boards range from $200 to $650 with labor.
  • Prices are set per job by a written estimate, and estimates are free.
  • Call (855) 632-1674. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Gate Parts & Welding Cost Breakdown (2026)

These are typical Glendale-area ranges for 2026. They cover the part and the labor to fit it for a standard residential swing or slide gate. Commercial gates, wide openings and heavy ornamental steel sit at the top of each range.

Job Typical Cost Range What It Covers
Small hardware (roller, hinge, latch, stop) $85 – $150 Replacement part plus fitting and adjustment
Gate wheel or track repair $120 – $280 New wheel, track straightening, realignment
Welding a cracked frame or hinge point $150 – $400 On-site metal repair, grinding, refinish prep
Re-hanging a sagging gate $180 – $380 Hinge rebuild, post anchor check, re-level
Operator arm or motor replacement $250 – $650 Part, fit, wiring check, travel programming
Control board replacement $200 – $550 Board, low-voltage wiring, re-programming remotes
Safety sensor or loop repair $120 – $320 Sensor, alignment or loop reconnection
Automated gate diagnostic visit Free estimate Fault finding, written price before work

A few things push the price up in Glendale. Wide or double gates need more welding and heavier parts. Heavily rusted or out-of-alignment frames take longer because the metal has to be brought back to square before a new part will sit right. Brand matters too: a control board for a LiftMaster or DoorKing system is a different part than one for a Ghost Controls or Viking operator, and access to the board varies. And any gate that has an operator adds electrical checks on top of the mechanical work, which is exactly where a specialist earns their keep. We come prepared across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule, so the diagnosis starts with your system rather than a guess.

Want to talk it through?Free estimate, price agreed before work starts
Call (855) 632-1674

What Affects Gate Parts & Welding Pricing in Glendale

Not every gate job prices the same way. Here’s what moves the number up or down when we quote a parts or welding job in Glendale.

  • The gate type. A light residential swing gate with a small operator is the simplest case. A heavy slide gate with a steel frame needs more welding, more anchors and more alignment time, and that shows up in the labor half of the estimate.
  • Whether the part is standard or brand-specific. Common hardware is quick to source. An operator arm, control board or sensor for a specific brand takes more time to match and fit, and the cost reflects that.
  • The climate and sun exposure. Glendale summers are hard on outdoor metal and on the plastic and rubber parts of an operator. Sun-cooked sensors, brittle covers and faded control housings fail sooner, and rust is a constant on uncoated steel. Keeping the frame painted and the operator shaded goes a long way toward fewer repairs.
  • Gate weight and swing or slide geometry. A gate that has dropped on its hinges or come off the track needs the frame brought back true before new parts go on. Straightening is welding work, and it’s usually the difference between a $150 fix and a $400 one.
  • Access and power for the operator. Automated gates need low-voltage wiring and power at the post. If a sensor or loop needs reconnection, the run to the control box affects the job time, and so does anything buried that has to be tested.
  • Repair versus replace. A cracked hinge bracket is a weld job. A frame that’s rusted through at the stress points is a different conversation. We lean toward repair wherever the metal is sound, because that’s usually the lower-cost path and it keeps your gate matched to its existing hardware.

How to Save on Gate Parts & Welding

You can keep gate costs down without cutting corners. A few practical moves help.

  • Get the problem looked at early. A hinge that’s starting to sag is a small welding and adjustment job. Left alone, it pulls the frame out of square and turns into a bigger one.
  • Keep the operator and its parts out of the worst sun. Shade or a simple cover over the control box extends the life of the board, sensors and wiring.
  • Touch up rust before it spreads. A quick coat on bare steel at the welds and hinge points slows corrosion and protects the parts you already have.
  • Ask for a repair-first diagnosis. A dedicated gate specialist can tell you whether the gate needs a part or a replacement. We recommend repair when the frame is sound, not a new gate because a brand changed hands.
  • Bundle small items into one visit. If a hinge is loose and a roller is worn, having both handled in a single trip is cheaper than two separate visits.
  • Use the free estimate. Call (855) 632-1674, get a written price, and compare options before any work starts. The estimate is free and there’s no obligation.

Why Gate Parts and Welding Need a Specialist

Parts and welding on a gate sit at the intersection of metalwork and access control, and that’s the reason a general repair company often struggles with them. A gate that won’t close could be a bent hinge, a dead control board, a misaligned sensor or a loose anchor, and the only way to price the fix correctly is to know which one it is. Our technicians have up to 12 years of experience, and the diagnostic approach is brand-agnostic: the recommendation follows what the gate actually needs, not which brand a technician is set up to sell. We work across nine major operator brands so that a Ghost Controls or Viking system gets the same attention as a LiftMaster or DoorKing setup. When the answer is a part, we source and fit it. When it’s welding, we bring the frame back true. Either way, the goal is your gate back in operation and the security of the property restored.

If you’re weighing a repair against a bigger change, it helps to see the wider picture of what gate work involves and how a specialist approaches it. You can read more about gate repair in Glendale and the full range of what we handle locally on our Glendale service page.

Need a price for your gate repair?Free estimate, price agreed before work starts
Call (855) 632-1674

FAQs – Gate Parts & Welding Cost

How much does it cost to weld a gate in Glendale?

Welding a gate in Glendale usually costs $150 to $400 for a typical residential job, covering the metal repair, grinding and prep, with the exact price set by a written estimate after we see the gate. Heavier steel, wide double gates and frames that need realignment sit at the top of that range. Call (855) 632-1674 for a free estimate.

Is it cheaper to repair the gate or replace it?

Repair is usually cheaper than replacement when the frame is still sound, and for most residential gates a parts-and-welding repair runs $150 to $650 versus the cost of a whole new gate and operator. Replacement makes sense when the frame is rusted through at the stress points or the gate has failed structurally. We give you the repair price and the honest read on whether it’s the right call. Call (855) 632-1674 – estimates are free.

How much does an automatic gate control board cost in Glendale?

A control board replacement in Glendale typically runs $200 to $550 including the part, the low-voltage wiring check and re-programming your remotes to the new board. The brand matters here, since a board for a DoorKing or LiftMaster system is different from one for a Mighty Mule or Linear operator. Call (855) 632-1674 for an exact quote on your system.

Can you come the same day for a gate repair in Glendale?

Same-day service is often available in Glendale. Call (855) 632-1674. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.

Do you work on my gate brand?

Likely yes. We work on nine of the most widely installed gate operator brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. That covers most residential and small commercial systems around Glendale. Tell us the brand and model when you call (855) 632-1674, and we’ll confirm before we come out.

Get a Free Gate Parts & Welding Estimate in Glendale

Whether your gate needs a new hinge, a weld, a control board or a full diagnostic, the fastest way to know the price is to get a written estimate. We’re a dedicated gate specialist with the parts knowledge and the electric gate experience to handle the job, from the motor to the control board. Estimates are free, and the price is set per job in writing before any work starts. Call (855) 632-1674. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday.

Pricing reflects the Glendale market as of 2026. Gate Repair Glendale offers free estimates – call (855) 632-1674.

Written by the team at Gate Repair Glendale.

What Our Customers Say

★★★★★ 4.8 from 8+ reviews

"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."

- Paige Vaughn

"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."

- Alicia Ellison

"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."

- Lamont Bryant
Need Gate Repair help in Glendale? Licensed & insured · 1-hour response · free estimates
Call (855) 632-1674

Request a Free Estimate

Tell us what's going on in Glendale. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7